Wooden world maps are a beautiful and sophisticated way to decorate your home or office. They add a touch of elegance and a sense of adventure to any space. However, installing and caring for a wooden world map can be a bit daunting if you don’t know where to start. This guide will walk you through the process, from installation to maintenance, ensuring your map remains a stunning centerpiece for years to come.
Wooden world map installation guide
1. Unboxing and preparation
- Unbox carefully: Gently unpack your wooden world map. Lay out all the pieces on a clean, flat surface. This will help you familiarize yourself with the parts and ensure everything is included.
- Clean the wall: Wipe down the wall where you plan to install the map. Dust and dirt can prevent the adhesive from sticking properly.
- Plan your layout: Before applying any adhesive, arrange the pieces on the floor or on a large table. This helps you visualize the final placement and make any adjustments.
2. Marking and measuring
- Find the center: Use a measuring tape to find the center point of your wall. Mark it lightly with a pencil.
- Outline the map: Using a level and measuring tape, lightly outline where the map will go. This ensures your map will be straight and centered.
3. Applying adhesive
- Double-sided tape/adhesive: Most wooden maps come with double-sided tape or adhesive squares. Apply these to the back of each map piece, ensuring they are placed near the edges and in the center for a secure hold.
- Press firmly: Starting from the center, press each piece firmly onto the wall. Hold each piece in place for a few seconds to ensure the adhesive bonds well.
4. Level and adjust
- Check with a level: Periodically check the alignment with a level as you go. Make any necessary adjustments before the adhesive sets completely.
5. Final touches
- Remove pencil marks: Once all pieces are securely in place, gently erase any visible pencil marks.
- Inspect the map: Step back and inspect the map for any misalignments or loose pieces. Adjust if needed.
The best place for a wooden world map
Direct sunlight should be avoided as it causes the wood to fade.
There is no need to install the map in humid places such as the bathroom. Moisture contributes to the deformation of wood. Remember these main rules when choosing the place of installation of a wooden map of the world with backlighting.
You can also read about the most suitable places to place wooden maps in our article “Top 5 places for wooden maps”.
Care of a wooden world map
The best way to clean a wooden world map is to wipe it with a soft cloth (it can be microfibre, suede or flannel) or medium-hard brushes. Avoid using harsh detergents to avoid damaging the surface of the wood.
Special furniture antistatic agents can be used to reduce dust settling.
You should periodically check the condition of the card mounts, especially if it is large in size. Make sure that the carat is firmly attached to the wall and does not move.
Try not to bump or drop the map to avoid mechanical damage.
